| IPC Pico-ITX NP93-2930 Anakart |
|
| Form Factor |
| Dimensions | - Pico (100 X 72 mm) |
| Processor System |
| CPU | - Intel® Bay Tria Processor N2930/N2807 |
| Core Number | - by CPU |
| Max Speed | - by CPU |
| L2 Cache | - by CPU |
| Chipset | - SoC |
| BIOS | - UEFI |
| Expansion Slot |
| PCI | - 0 |
| Mini-PCIe | - 1 (half size) |
| mSATA | - 1 |
| PCIe | - 0 |
| CFast Card Socket | - 0 |
| CF Card Socket | - 1 |
| Memory |
| Technology | - 2 * DDR3 1333MHz Single CH on board |
| Socket | - 0 |
| Graphics |
| Controller | - Intel® HD Graphics up to 854 MHz |
| VRAM | - Shared Memory |
| VGA | - No |
| LVDS | - 1 * Onboard 24-bits dual channel connector |
| HDMI | - 1 |
| DVI-I | - No |
| DisplayPort | - No |
| MultiDisplay | - Yes (Dual Display) |
| Ethernet |
| Ethernet | - 10/100/1000 Mbps |
| Controller | - GbE LAN: RTL8111G |
| Connector | - 1 x RJ 45 |
| SATA |
| Max Data Transfer Rate | - 1 * SATAII (3.0Gb/s) |
| Rear I/O |
| VGA | - 0 |
| DVI-I | - 0 |
| HDMI | - 1 |
| DisplayPort | - 0 |
| Ethernet | - 1 |
| USB | - 2 (1 x USB 2.0 + 1 x USB 3.0) |
| Audio | - 0 |
| Serial | - 0 |
| eSATA | - 0 |
| PS2 | - 0 |
| DC-input | - DC in Jack 12V |
| Internal Connector |
| USB | - 6 ( 6 x USB 2.0 via 10pin header ) |
| PS2 | - 1 |
| LVDS/ inverter | - 1 |
| VGA | - 0 |
| Serial | - 1 (1 x RS-232 with 5V/12V selectable header) |
| SATA | - 1 * SATAII (3.0Gb/s) |
| mPCIe | - 1 (half size) |
| Parallel | - 0 |
| mSATA | - 1 |
| CIR | - 0 |
| GPIO 8-bit | - 0 |
| Chassis intrusion | - 1 (via 12pin header) |
| Audio Header | - 1 |
| Watchdog Timer |
| Output | - From Super I/O to drag RESETCON# |
| Interval | - 256 segments, 0,1,2…255sec/min |
| Power Requirements |
| Input PWR | - 9~36V DC-In (2-pin PWR Con) |
| Power On | AT/ATX Supported - AT : Directly PWR on as Power input ready - ATX: Press Button to PWR on after Power input ready |
| Certifications |
| Certifications | - CE, FCC, RoHS, REACH |
| Environment |
| Temperature | - Operating: 0?– 60? |
| - Storage: -20?– 85? |
